Dragon Sleeve
Heavy Duty Abrasion Protection For Cable And Hoses
What's special about this extreme temperature braided sleeving?
- Lightweight
- Flame Resistant
- Resists Sparks
- Double Wall Construction
- Tear Resistant
- Click for More Features
The fairy tale protection of dragons skin isn’t make believe any more. This Dragon is for real. Dragon Sleeve is made to withstand temperatures so unbelievable that it would melt your mind. Designing a hose that you can melt metal on? Developing a wire harness to suspend over a lava field? We’ll leave it to you to dream up how to use heat protection like this. While you are dreaming of where to use Dragon Sleeve, Techflex will keep inventing more of the most innovative sleeving products you will need to keep up with your imagination.
1/8" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN0.13-200ft | 200' | ||
|
DGN0.13-500ft | 500' |
1/4" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN0.25-100ft | 100' | ||
|
DGN0.25-500ft | 500' |
3/8" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN0.38-100ft | 100' | ||
|
DGN0.38-500ft | 500' |
1/2" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN0.50-100ft | 100' | ||
|
DGN0.50-500ft | 500' |
3/4" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN0.75-50ft | 50' | ||
|
DGN0.75-250ft | 250' |
1 1/4" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN1.25-25ft | 25' | ||
|
DGN1.25-250ft | 250' |
1 3/4" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN1.75-25ft | 25' | ||
|
DGN1.75-200ft | 200' |
2" Diameter | ||||
---|---|---|---|---|
Color | Part # | Length | Price | |
|
DGN2.00-25ft | 25' | ||
|
DGN2.00-200ft | 200' |
The smooth internal wall of DBN not only makes installing this braided sleeving fast and pain free, it also provides a high level of abrasion resistance from the material that it’s protecting.
- Fibers are tightly woven to provide a wide range of flexibility without losing any structural integrity
- Cuts easily with scissors, or it can also be cut and cleanly finished with a hot knife
- Inner wall is exceptionally smooth to provide easy installation and an extra degree of protection from rough or uneven materials that could cause internal abrasion
- UV and chemical resistant to protect both the material and internal hoses or cables from corrosion and ultraviolet degradation
- Nylon woven braids protect outdoor applications from gnawing vermin and rotting
- ISO 6945 Certified
- RoHS Compliant
- MSHA Compliant
- Halogen Free
- Proudly made in the U.S.A.
- Braided Sleeving Comparison Chart
- Abrasion Resistance Comparison Chart
- Chemical Resistance Comparison Chart
- Flammability VW-1 Comparison Chart
ABRASION PROPERTIES | |
Abrasion Resistance | Extremely High |
---|---|
Abrasion Test Machine | Taber 5150 |
Abrasion Test Wheel | Calibrase H-18 |
Abrasion Test Load | 500g |
Room Temperature | 85°F |
Humidity | 74% |
Minimal Visible Wearing | 400 Test Cycles |
Visible Wearing | 3,000 Test Cycles |
Heavy Wear | 11,000 Test Cycles |
Material Destroyed-Hole Through Material | 13,000 Test Cycles |
Pre-Test Weight | 14,096 mg |
Post-Test Weight | 11,705 mg |
Test End Loss Of Mass Point Of Destruction | 2,391 mg |
CHECMICAL RESISTANCE | |
Aromatic Solvents | 1 |
---|---|
Aliphatic Solvents | 1 |
Chlorinated Solvents | 1 |
Weak Bases | 1 |
Salts | 1 |
Strong Bases | 2 |
Salt Water 0-S-1926 | 1 |
Hydraulic Fluid MIL-H-5606 | 1 |
Lube Oil MIL-L-7808 | 1 |
De-Icing Fluid MIL-A-8243 | 1 |
Strong Acids | 5 |
Strong Oxidants | 5 |
Esters/Keytones | 1 |
UV Light | 2 |
Petroleum | 3 |
Fungus ASTM D-2863 | 2 |
Outgassing | High |
Oxygen Index ASTM D-2863 | 22 |
1= No Effect / 2= Little Effect / 3=Affected / 4= More Affected / 5= Severely Affected |
PHYSICAL PROPERTIES | |
Wall Thickness ASTM D-204 | 0.08 |
---|---|
Recommended Cutting | Scissor |
Stock Colors | 1 |
Tensile Strength PSI ASTM D-2256 | N/A |
Tenacity (GM/Denier) ASTM D-4157 | N/A |
Specific Gravity ASTM D-792 | N/A |
Typical Elongation ASTM D-2256 | N/A |
Melt Point ASTM D-2117 | 410° F (374° C) |
Maximum Continuous Mil-I-23053 | N/A |
Minimum Continuous | N/A |
Manuals
Related Articles
How-To Corner
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts