Neatrack Rack Organization System

• Cable Rings are available in 1" and 2" diameters
• Rack Rings are available in 1", 2", and 4" diameters.
• Cable Clips are universal (Cat6, cat5, Speaker Wire, Control Cable, Etc.)
• Lacing Bars allow you to add and remove accessories quickly
• Lacing Bar Extenders add 4" of clearance between the lacing bar and your rack

Rack Rings & Cable Rings

• Pull wires faster and with less resistance than other designs
• Pulling AND fastening of wires during a pre-wire is now done with the same product.
• Zip tie mounting is built-in and super easy to use when needed.
• Neater, more professional looking than any other product.
• Rings can be used even in narrow stud bays where literally no other product can.
• Integrated and separate management of emitter wiring in the same ring(URR’s) keeps these delicate wires safe from the rest of the bundle and reduces the need to buy and use other solutions.
• Rack rings are designed to be mounted to the rails AND inserted into a ULB(Ultimate Lacer Bar), no need for a separate SKU for vertical wire management.
• Can be used front and back of rack and front and back of each rail.

The Neatrack Rack Rings are available in 1”, 2”, and 4” diameter options. These rack rings can be mounted to rails or fit into the lacing bar in whatever orientation you would like. Use as few or as many rings as you need, you can even mix and match the sizes. The 4” rack ring mounts directly to your rack to help funnel cables to their desired location. These rings provide a neat and professional looking finished wiring system.

Lacing Bars

• One lacer bar to rule them all.
• Facilitates lacing and routing of ALL types of cables at the same time but independently.
• Get your rack laced faster than ever before.
• Has a control cable cave built-in. Allows emitter wires and dc power cables to be routed safely away from the main bundles.
• Easier to remove and troubleshoot bad cables.
• No need for multiple rounds of zip ties.
• Zip ties are properly used with this design. No gouging of delicate Cat5 cables.
• Safer for fiber optic cables
• Rear mounted equipment can be removed without cutting all your zip ties and loosening the whole bundle of wires.

The Neatrack lacing bar is the base unit that you can add and remove the other accessories to when organizing your rack system. The bar is 19” long Carbon Fiber PETG to fit standard rack set-ups. The lacing bar facilitates fast lacing and routing of all types of cables at the same time but independently. The bar features a control cable built-in which allows emitter wires and DC power cables to be routed safely away from main bundles.

Cable Clips

• One type of fastener for every type of cable- Cat6, Cat5, Speaker wire, Control cable, Alarm wire and Fiber of different sizes and strands.
• Completely prevents the possibility of putting a traditional staple through your wire.
• Uses standard T-25 staples for every SKU
• Keeps your hand and wrist in the best position when stapling to avoid strain on the wrist.
• Safer, faster, more professional than any other solution.
• Less tools and parts to keep in the van and in your pockets.
• Some SKU’s allow you to fasten 2 or even 3 wires with only 1 T-25 staple and one UCC
• Impossible to staple/fasten the cable too hard.
• Safest fastening solution for fiber optic cables.

Neatrack Lacing Bar Extenders
The Neatrack Lacing Bar Extenders, sold in a set of 2, add 4” of clearance between the lacing bar and your rack for extra space when the application calls for it. These extenders can be added or removed as necessary.