Power Extension Cords

Extension Cord Safety Tips

Stretch like Mr. Fantastic without catching on fire like the Human Torch

If you're like most folks, your extension cord needs, as far as you know, are as follows: It's big (like, longer than a normal cord) and orange (because extension cords should be orange). However, it's worth knowing that there's more to extension cords than length and orange-ness. Just because a particular cord is long enough, it's not necessarily the right one for the job.

Power extension cords are not all created equal. In fact, they're not even all orange! They're actually manufactured to be used in different environments, and to carry varying amounts of electrical current. By basing your choice of extension cord on each task’s specific requirements, you can greatly reduce the risks of fire, electrical shock, and serious injury. And really, nobody wants their epitaph to read “Here lies ____. He/She used the wrong extension cord and died.” So keep reading… below you'll find a brief extension cord tutorial and helpful safety tips, courtesy of CableOrganizer.com!

Indoor & Outdoor Classifications

Extension cords are classified for either indoor or outdoor use. What's the difference between the two, besides the obviousness of where they're meant to be used? The insulation, or jacket, of an outdoor-rated extension cord is made of a tougher material, which is designed to withstand temperature changes, moisture, UV rays, and (sometimes) chemicals. While it's fine to use an outdoor power cord indoors, never use an indoor-rated extension cord for an outside job… doing so could cause electric shock or create a fire hazard.

Gauge, Distance and Wattage Rating

Any electrical cord, extension or otherwise, contains an inner metal conducting wire, which carries electrical current from one end to the other. The thickness of this conductor is referred to as its gauge. Gauge is indicated by a number; the lower the number, the thicker the wire is. A wire's thickness directly affects the amount of current (or wattage) it can carry over a certain distance.
The number of watts an extension cord can safely transmit (given its length and gauge) is known as a wattage rating. Before plugging an appliance or power tool into an extension cord, it's extremely important to be sure that the power demand (or pull) of that device doesn't exceed the cord's wattage rating. On the same note, if you'll be powering multiple devices from one extension cord, calculate their combined energy requirements and make sure that the total isn't higher than the wattage rating for that cord. Never use an extension cord to supply more wattage than it's rated for, since overheating and fire may occur.

How to Determine a Device's Power Requirements

If the last section left you scratching your head wondering exactly how you're supposed to know any of these numbers, fear not. For the most part, you won't need to do more than consult the manufacturer's instructions. Another good place to look for wattage specs? The tags that are often attached to a device's power cord. And if all else fails, a quick call to the product's manufacturer should clear up any questions. Or, you know, Google it on the internet. We do live in the future, after all. Just make sure your source is reputable, preferably the manufacturer.

In some cases, you may find that wattage requirements are listed in amps and volts instead. For these situations, there's a simple formula that can help you calculate electricity requirements: just multiply the number of amps by the number of volts… the resulting number equals that appliance's wattage. Here's an example: if a device uses 5 amps at 110 volts, that translates into 550W (5 x 110 = 550). So simple a fifth grader could do it. Or at the very least, your calculator.

A few things to know before you plug in:

• For your protection, power cord labels are printed with handy product specs that tell you the cord's length, size (wire gauge), wattage, and proper usage environment (indoors or outdoors). So before you unwind that cord and hook it up to a power tool, read the label…I know it sounds like the nerdy thing to do, but checking only takes a few seconds, and it might just save you from injury or property damage!
• When shopping for extension cords, only purchase those that bear the UL symbol. The presence of the UL mark tells you that samples of that particular type of cord have been tested by Underwriters Laboratories and received consumer safety approval. Otherwise, it might just be a piece of string someone glued plug ends onto. Or it might be a live snake. Without the UL symbol, you just don't know.
• Don't use extension cords with cut or damaged insulation… exposed conducting wires can put you at risk for fire, burns and electrical shock.
• Do not cut, file, or otherwise alter an extension cord's grounding pin or plug blades to make it easier to plug into an outlet! If the extension cord plug doesn't fit into an older outlet, have an electrician replace the receptacle. Or get a new cord that isn't all messed up.
• Extended exposure to outdoor conditions can cause cords to deteriorate, so whether they're rated for indoors or outdoors, store all extension cords inside when they’re not in use.
• Regardless of whether or not it's being used, as long as a power extension cord is plugged into an outlet, it's conducting electricity. To avoid potential safety hazards, always remember to unplug extension cords when they're not in use! And If your electrical extension cord can accommodate multiple plugs but not all outlets are being used, block unused openings with outlet covers to prevent injury to children and pets.