Electrical safety is an important facet of home maintenance. Follow these tips from CableOrganizer® below:
1. NEVER MIX WATER & ELECTRICITY
Always keep electrical appliances away from water and moisture. Whether it's on or off, if an appliance that is plugged in falls — or is accidentally dropped into water — do not attempt to retrieve or unplug it. Go immediately to your home's panel board and shut off power to the corresponding circuit. Once that's done, the appliance can be safely unplugged and removed from the water. After the device has dried thoroughly, have an electrician evaluate if it's fit for continued use.
2. PAY ATTENTION TO WHAT YOUR APPLIANCES ARE TELLING YOU
When an appliance repeatedly trips a circuit breaker, blows a fuse, or gives you shocks, it's not just a coincidence — these are signs that something is wrong. Prevent further — and possibly more dangerous malfunctions — from occurring by immediately unplugging the appliance and discontinuing use until a professional electrician can inspect it, make repairs and ultimately declare the appliance safe.
3. INSTALL GROUND FAULT CIRCUIT INTERRUPTERS (GFCI)
In new construction homes, GFCI receptacles are a requirement anywhere that electrical outlets and water will be in close proximity to one another. GFCIs detect current leakages (or ground faults) in electrical circuits — such as would occur when a powered device meets water. The GFCI then shuts off power to that receptacle almost instantaneously, preventing electrical shock, burns and electrocution. If you live in an older home that didn't come standard with GFCIs, installing them in place of traditional outlets in your bathroom, kitchen and garage is an easy way to prevent severe electrical injuries — and at very little cost.
4. MAKE SURE YOU'RE USING THE RIGHT SIZE CIRCUIT BREAKERS & FUSES
If fuses and circuit breakers aren't the right size and wattage rating to match the specifications of their circuits, they're going to fail right when you most need them to perform. Read packages carefully when shopping for replacements. If you're not sure which size to buy, have an electrician look at your panel box and label it with the circuit breaker or fuse size needed (for easy future reference). If you're making a trip to the hardware store, stock up with a few extra — you'll be happy to have them on hand when the next need arises.
5. PROTECT KIDS WITH OUTLET COVERS
Protect kids with Child Safety Kits. The Child Safety Kit from CableOrganizer® is one of our specialized Curated Kits that we created with a number of cable management products that can keep babies and small children safe from various electrical hazards. Purchasing the Child Safety Kit not only offers the convenience of numerous items in one set, but it also provides a cost savings when purchasing all of these items together.
6. AVOID CUBE TABS & OTHER OUTLET-STRETCHING DEVICES
Cube taps — those little boxes that allow you to plug several appliances into a single outlet — may seem like a major convenience, but they can put you on the fast track to circuit overload, overheated wiring and even a fire. If you absolutely must use one, do the math before plugging in. Know the maximum power demand that the cube-tapped receptacle can handle and be certain that the collective pull (power requirement) of the devices you're plugging into it doesn't exceed that rating.
7. REPLACE MISSING OR BROKEN WALL PLATES
They're not just there for the looks — wall plates also protect your fingers from touching the electrical wiring behind them. Broken wall plates — or the absence of them altogether — can be especially dangerous in the dark. If you’re trying to locate a switch by touch, you may end up being shocked or electrocuted if you miss the mark; and end up hitting live wires instead.
8. KEEP ELECTRICALLY POWERED YARD CARE TOOLS DRY
Whether it's raining, just finished raining — or you've recently run the sprinklers — never attempt yard work with electrically powered tools in wet conditions. Protect yourself from shock and electrocution by keeping your electric hedge trimmer, weed whacker and lawnmower safely unplugged. It should stay stowed away until precipitation has stopped, grass and foliage are dry; and puddles can be easily avoided.
9. MATCH THE LIGHT BULB'S WATTAGE RATING TO THE LAMP
Whenever choosing light bulbs to use with a lamp, be sure to consult that lamp's maximum wattage specifications (they're often printed right around the light bulb socket). Always opt for a light bulb with wattage that’s equal to or less than the maximum wattage listed on the lamp. A bulb that is too strong can lead to overloaded lamp wiring, as well as fire.
10. BE KIND TO YOUR CORDS
Take care to treat power cords gently — never nail or tightly tack them down — and regularly check to make sure that they're not pinched between or underneath furniture. Excessive pressure on power cables can damage insulation (exposing the conductor) or compress the conducting wire. This can lead to overheating and put you at risk for an electrical fire.
Get powered up at CableOrganizer® and shop for all the electrical supplies you need to keep your space safe and energy efficient.
