‹ ›

Black Box CAT5e Installation Kit

Cut, Test, and Everything in Between

What's special about this cable termination kit?

Provides you with a comprehensive set of tools for cutting, stripping, terminating and testing twisted pair CAT5e cable.
Ensures that cabling is properly terminated and tests in compliance with TIA/EIA standards.
Includes a hard case for you to store and transport your tools from jobsite to jobsite minimizing damage or the loss of tools.
Click for More Features

The CAT5e Installation Kit from Black Box replaces all the tools you need for cutting and testing your network cables. This convenient tool set is perfect for contractors, IT technicians, and more.

Part #	Description	Case	Weight	Price
BB-FT475A-R3	Black Box Cat5e Installation kit Includes: (1) EZ Check Cable Tester (EZCT) (1) Multi-Strip Cable Stripper (FT231A) (1) Universal RJ Crimp Tool (FT046A) (25) Category 5e, RJ-45 Plugs (FMTP5E-25PAK) (1) Carrying Case (FT390) 1000 feet of GigaBase 350 CAT5e, 350-MHz Solid Bulk Cable (EYN857A-PB-1000)	6"H x 9.5"W x 2.6"D (15.2cm x 24.1cm x 6.6cm)	20lbs	Qty: Manufacturer Direct

Also contains 1000ft of cable so you can complete cable runs or create patch cords on site

Backed by BlackBox’s Standard Double Diamond™ Warranty

Easy to use tools require little to no instructions for use

High quality tester:

Provides you with fast and easy pass/fail results to quickly test or troubleshoot terminated cables

Gives clear test results via the LED for opens, shorts, continuity, split pairs, and reversals

Multi-Stripper:

Strips and removes a variety of jacket materials on both twisted pair and flat satin cable

Features a tension loop and adjustment screw so you can fine tune the blade’s penetration

Universal crimp tool:

Works for just about any type of RJ connector and twisted pair cable

Sturdy tool grade steel construction is sure to last termination after termination

CAT5e RJ-45 plugs:

Ideal for use on solid wire 4-pair UTP and exceed TIA/EIA requirements

Twist requirements are maintained with the built in load bar, which also assists with proper wire insertion

Carrying Case:

Double wall HD polyethylene construction for ultimate tool protection

Equipped with foam inserts to keep tools securely in place

Part #	BB-FT475A-R3
1000 FT Cable
ACR (Minimum at 100m)	16.3 dB at 100 MHz 1.4 dB at 200 MHz
Attenuation (Minimum at 100m)	22.0 dB at 100 MHz 32.4 dB at 200 MHz 41.0 dB at 300 MHz 44.9 dB at 350 MHz
Cable Type	4-pair UTP
Capacitance Unbalanced (Maximum)	3300 pF/km (Pair to ground)
Characteristic Impedance	1–350 MHz: 100 ± 15 ohms
Conductor	24 AWG, solid, bare copper
Conductor Resistance	93.8 ohm/20° C maximum
Delay Skew (Maximum)	1–350 MHz: 40 nS/100 m
EL-FEXT (Minimum at 100 m)	23.8 dB at 100 MHz 17.7 dB at 200 MHz 14.2 dB at 300 MHz 12.9 dB at 350 MHz
NEXT (Minimum at 100 m)	38.3 dB at 100 MHz 33.8 dB at 200 MHz 31.2 dB at 300 MHz 30.1 dB at 350 MHz
PS-ACR (Minimum at 100 m)	14.3 dB at 100 MHz
PS-ELFEXT (Minimum at 100 m)	20.8 dB at 100 MHz 14.7 dB at 200 MHz 11.2 dB at 300 MHz 9.9 dB at 350 MHz
PS-NEXT (Minimum at 100 m)	36.3 dB at 100 MHz 31.8 dB at 200 MHz 29.2 dB at 300 MHz 28.1 dB at 350 MHz
Return Loss	20.1 dB at 100 MHz
Velocity of Propagation (Minimum)	62.1% at 350 MHz
Multi-Stripper
Cable/Crimp Type:	twisted pair and flat satin cable
Strip Type/Dimensions:	Strip lengths can be varied
Universal RJ Crimp Tool
Material	Tool-grade Steel
Strip Type/Dimensions:	Crimp RJ Connections/uses standard dies attached via Allen wrench
CAT5E Modular Plugs
Compatible Cable Diameters	24 or 26 AWG solid or stranded cable with a diameter of up to 0.225" (5.7 mm)
Applications	10BASE-T or 100BASE-TX
Tester
Dimension	3.37" x 4.86" x 2.1"
Weight	0.65 lbs
TIA568 Test Performed	Continuity Opens / Shorts Reversals Split Pairs
Carrying Case
Dimensions	6"H x 9.5"W x 2.6"D (15.2 x 24.1 x 6.6 cm)
Material	High Density Polyethylene
Contents Protected Temperature Range	-70°F (-18°C) to +180°F (+82°C)