Great Lakes ES Server Enclosure - 840ES-2442, 84"H x 24"W x 42"D

FRAME

 

Rugged reinforced base w/14 gauge post for increased weight capacity

Same top & door options as the Enhanced Series Enclosures

1800 lbs. weight capacity on casters

Convenient 3/4" anchoring holes allow easy access for bolting enclosure to floor

Front and rear doors and top panel have mesh panel inserts for ventilation

Networkable (side by side ganging)

Split side panels, lighter for easier handling

Increased strength with center side posts between side panels

---

CABLE ACCESS

 

Generous cable access

Corner posts have three 2.5" x 6" knockouts, allowing cable between enclosures

Top back has two 2.5" x 6" knockouts

Cables can enter the enclosure through 3 locations:

Opening in the bottom rear - 24"W x 3.75"D for 29"W enclosure and 19"W x 3.75D for 24:W enclosure

Opening in front of the rear opening - 13.5"W x 4"D for 29"W enclosure and 8.5"W x 4"D for 24"W enclosure

The center opening 11.75"W x 14.75"D for 29"W enclosure and 6.75"W x 14.75"D for 24"W enclosure

 

RAILS

 

Maximum rail spacing, front to rear, is 36"

The Universal rails (M6 - 12 gauge) are infinitely adjustable

These rails can accept multi-vendor "server specific" side mounting adapters

Reversible rails are marked with RMU count

Cinch strap/wire tie locations on side of rails both horizontal and vertical

 

 

 

ANTI-TIP LEGS

 

AT1 - Retractable anti-tip legs mount to the outside bottom of the frame and can be used when the cabinet is on glides or casters

Retractability allows you to safely clear the aisle

 

 

CABLE MANAGEMENT

 

Front & rear vertical cable management run in each rear corner post (optional QGL-CME-42ES)

Horizontal cable management left to right in the top front/rear with “waterfall” edges to protect cables. (optional QGL-HCM-W29ES)

Horizontal cable management front to rear (optional QGL-HCM-D42ES)

Cable loop lance located at the bottom rear opening allow you to secure your incoming cable

CABLE MANAGEMENT WHEN NETWORKED

 

No tools required for Networking - Kit QGL-G101

Numerous cable access knockouts in frame sides and top allows cable to pass from enclosure to enclosure without exiting frames. (with side panels installed)

Saves cables from exposure and on cable length

Exclusive design allows internal cabling to pass through multiple enclosures. (i.e. an internal mini ladder rack system included!)

POWER HANDLING

 

Zero RMU PDU mounting between side panel & rack mount rails

Up to four standard GLCC vertical power strips can be mounted to the two rear corner posts, two per post with optional bracket, part number QGL-PSB-ES2

 

 

 

 

 

 

 

 

BEVEL MESH DOOR WITH OPTIONAL FANS

 

Achieve "Lake Effect Cooling" by combining this bevel mesh door with optional cooling fans

Eliminate hot spots

Promotes horizontal ventilation

Multiple fan trays per door (up to 6 total)

Fan airflow reversible

Door accepts 8 position power strips - part# QGL-7218-24