‹ ›

STI Firestop Sleeve Kit - Split 1, 2, and 4 inch Ready™

Name: STI Firestop Sleeve Kit - Split 1, 2, and 4 inch Ready™
SKU: STI-FSR100

Out-of-the-Box Firestop Sleeve for Use Around Existing Through-Wall Cable Penetrations

STI-FSR100

What's special about this split sleeve?

Safety compliant and fire rated up to 4 hours
A cost effective way to run existing cabling bundles through walls when installed with the included classified firestop cable sleeve.
Used to protect and support cables in non-rated and rated construction.
Unique, original design created specifically for use with concrete floors, concrete walls, concrete black walls, and gypsum board/stud wall assemblies up to 10" thick.
Available in 1 inch (FSR100), 2 inch (FSR200), & 4 inch (FSR400) models
Click for More Features

This STI Firestop Cable Sleeve Kit is the product of choice when working with existing through-wall cable penetrations in cramped spaces or on a ladder, as it's only half the weight of most competing threaded products. Split sleeves are designed with a split pathway and come with wall plates which allow them to be implemented around existing cable bundles. The smooth finished rolled lip eliminates the need for conduit bushings.

Part #	Trade Size	Min. Opening	Max. Opening	Plate Diameter Min.	Weight	Price
STI-FSR100	1" (25mm)	1.16" (30mm)	2.25" (57mm)	3" x 3" (76mm x 76mm)	1.25 lbs	Qty: Manufacturer Direct
STI-FSR200	2" (51mm)	2.38" (60mm)	4.0" (102mm)	4.5" x 4.5" (114mm x 114mm)	2.78 lbs	Qty: Manufacturer Direct
STI-FSR400	4" (102mm)	4.5" (114mm)	6.0" (152mm)	8" x 8" (203mm x 203mm)	7.25 lbs	Qty: Manufacturer Direct

Each Kit Includes: Precut split metallic sleeve, split mounting plates, intumescent gaskets, wall labels, and putty to seal both ends.

Sleeves and wall are labeled to make inspection easy

Mounting holes in the wall plates secure the sleeve in openings that perhaps are big.

Incorporates a built in bushing, which ensures that cable jacketing is safe from damage and allows for smooth cable entry and pulling.

Easily put together: just clamp the sleeve and secure it within the wall.

Included in the kit are external firestop gaskets and sufficient SpecSeal® Firestop putty to seal both ends of the installed sleeve.

Perfect for the times that all your data, video, communication, power, and control cabling must be installed through sleeves that penetrate fire resistance rated barriers.

Convenient split sleeve design allows for installation after cables have been run through the walls, and accommodates present cable bundle diameter as well as anticipated growth.

ANSI/UL 1479, ASTM E814 rated F up to 4 hours for use with over-sized openings. 2003 IBC section 712.2 compliant

Applications include common constructions: concrete floors, concrete walls, concrete block walls, and gypsum board/ stud wall assemblies up to 10" (250mm) thick with hourly ratings up to 4 hours. Compatible with EMT Conduit accessories.

One year manufacturer warranty

For use in System Nos F-A-3029, W-J-3141, W-J-3142, W-L-3275, & W-L-3276.

Intumescent Gasket
Available Sizes	1" (25 mm), 2" (51 mm), 4" (102 mm)
Sleeve Construction	0.059" (1.5 mm) thick steel (zinc plated)
Plate Construction	0.074" (1.9 mm) thick steel (galvanized), 28 gauge
Expansion Temperature	350° F (177° C)
Volume Expansion	15x (free expansion)
In-Service Temperature	130° F (54.4° C)
Putty Fill
Material	SpecSeal® Firestop Putty
Color	Red
Odor	None
Solids	100%
Expansion Temperature	230° F (110° C)
Volume Expansion	8x (free expansion)
In-Service Temperature	130° F (54.4° C)
VOC Content	0.00 lbs/gal (0.0 g/l)
Shelf Life	Unlimited
cULus Classified	ANSI/UL 1479, ASTM E814 rated F up to 4 hours for use with over-sized openings
FM	Approved
IBC	2003 IBC section 712.2 compliant

FILL, VOID, OR CAVITY MATERIALS CLASSIFIED BY UNDERWRITERS LABORATORIES INC.® FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS

SEE UL FIRE RESISTANCE DIRECTORY

CLASSIFIED FILL, VOID, OR CAVITY MATERIALS FOR USE IN THROUGH-PENETRATION FIRESTOP SYSTEMS. SEE UL DIRECTORY OF PRODUCTS CERTIFED FOR CANADA AND UL FIRE RESISTANCE DIRECTORY

This product was tested to the following standards where applicable.

ASTM Standard

E814   Fire Tests of Through-Penetration Fire Stops
E119   Fire Tests of Building Construction and Materials
E1966 Fire-Resistive Joint Systems
E84    Surface Burning Characteristics of Building Materials
E1399 Cyclick Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E136  Behavior of Materials in a Vertical Tube Furnace at 750°C

UL Standard

1479  Fire Tests of Through-Penetration Firestops
263   Fire Tests of Building Construction Systems
2079  Tests for Fire Resistance of Building Joint Systems
723   Tests for Surface Building Characteristics fo Building Materials

Manuals

Technology Updates

How-To Corner

Warranty:

Specified Technologies Inc. manufactures its goods in a manner to be free of defects. Should any defect occur in its goods (within one year), Specified Technologies Inc., upon prompt notification, will at its option, exchange or repair the goods or refund the purchase price.

Limitations and Exclusions:

This warranty is in lieu of all other representations expressed or implied (including the implied warranties of merchantability or fitness for use) and under no circumstances shall Specified Technologies Inc. be responsible for any incidental or consequential property damage or losses. Prior to use, the User shall determine the suitability of the product for its intended use, and the User assumes all risks and liability for subsequent use.

Request A Quote

Did you know that we can give you a quote for most of our products, including shipping?

You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)

Questions & Answers

Do you have any questions about this product?
Let our experts and customers resolve all your doubts