Cable Shield Cord Cover
Quality Cable and Wire Protection for Walls and Floors at an Affordable Price
What's special about these Cable Shield floor and wall cord covers?
- Designer finish and durable quality protects and organizes loose cables, while complementing preexisting décor or flooring.
- 2-piece design separates easily for cable installations, and locks securely in place in heavy trafficked areas or vertical applications.
- Pre-applied adhesive backing for fast and simple installation on most types of floor, walls, desks or workstations (additional adhesive backing may be required for higher-density applications).
- Click for More Features
A basic, inexpensive electrical cord cover for floors and walls, the Cable Shield can withstand weights up to 661 lbs. to keep cables from being crushed or damaged in home and office environments. This versatile cord cover is available in two lengths (31" and 59") and four colors: black, brown, wood grain and terracotta, and features an adhesive backing to keep it in place.
| 31" Length Cable Shield | |||||
|---|---|---|---|---|---|
| Part # | Overall Dimensions | Channel Dimensions | Colors | Weight | Price |
| ED-CSX-1-31 | 1.125" W x 0.5" H x 31" L | 0.4" W 0.25" H | Black, Terracotta | 0.25 lb | Manufacturer Direct
|
| ED-CSX-2-31 | 2.0" W x 0.5625" H x 31" L | 1.0" W x 0.3" H | Black Temporarily Out of Stock, Terracotta | 0.688 lb | Manufacturer Direct
|
| 59" Length Cable Shield | |||||
|---|---|---|---|---|---|
| Part # | Overall Dimensions | Channel Dimensions | Colors | Weight | Price |
| ED-CSX-1-59 | 1.125" W 0.5" H x 59" L | 0.4" W 0.25" H | Black, Brown Temporarily Out of Stock, Terracotta | 0.5 lb | Manufacturer Direct
|
| ED-CSX-2-59 | 2.0" W x 0.5625" H x 59" L | 1.0" W x 0.3" H | Terracotta, Wood Grain | 1.375 lbs | Manufacturer Direct
|
| ED-CSX-3-59 | 2.75" W x 0.75" H x 59" L | 1.7" W x 0.55" H | Terracotta, Brown | 1.75 lbs | Manufacturer Direct
|
| ED-CSX-3-59-WG | 2.75" W x 0.75" H x 59" L | 1.7" W x 0.55" H | Wood Grain | 1.75 lbs | Manufacturer Direct
|
| ED-CSX-4-59 | 3.5" W x 0.875" H x 59"L | 2.5" W x 0.6" H | Brown, Terracotta Temporarily Out of Stock | 2.0 lbs | Manufacturer Direct
|
| ED-CSX-5-59 | 4.75" W x 1.1875" H 59"L | 3.6" W x 0.9" H | Gray Temporarily Out of Stock, Brown, Terracotta | 3.0 lbs | Manufacturer Direct
|
| Accessories | |||||
|---|---|---|---|---|---|
| Part # | Overall Dimensions | Channel Dimensions | Colors | Weight | Price |
| SBV-RH100 | Rubber-Based Adhesive Sticky Back Velcro Hook 88 | 1" | 1' | Transparent | Quick Ship
|
| Material | High impact, rigid, self-extinguishing PVC |
|---|---|
| Service Temperature | 185° F (85° C) |
| Crush Test Weight | 150Kg - 300 Kg/M2 |
| Application(s) | Indoor Use Only |
| Adhesive | Preinstalled high quality double-sided tape |
| PART # | OVERALL | CHANNEL | WEIGHT | COLORS | ||||
| length | width | height | height | width | divided | |||
| ED-CSX-1-31 | 31" | 1.125" | 0.5" | 0.25" | 0.4" | no | 0.25 lb | Black, Terracotta |
| ED-CSX-2-31 | 31" | 2.0" | 0.5625" | 0.3" | 1.0" | no | 0.688 lb | Black Temporarily Out of Stock, Terracotta |
| ED-CSX-1-59 | 59" | 1.125" | 0.5" | 0.25" | 0.4" | no | 0.5 lb | Black, Brown Temporarily Out of Stock, Terracotta |
| ED-CSX-2-59 | 59" | 2.0" | 0.5625" | 0.3" | 1.0" | no | 1.375 lbs | Terracotta, Wood Grain |
| ED-CSX-3-59 | 59" | 2.75" | 0.75" | 0.55" | 1.7" | no | 1.75 lbs | Brown, Terracotta |
| ED-CSX-3-59-WG | 59" | 2.75" | 0.75" | 0.55" | 1.7" | no | 1.75 lbs | Wood Grain |
| ED-CSX-4-59 | 59" | 3.5" | 0.875" | 0.6" | 2.5" | yes | 2.0 lbs | Brown, Terracotta |
| ED-CSX-5-59 | 59" | 4.75" | 1.1875" | 0.9" | 3.6" | yes | 3.0 lbs | Gray Temporarily Out of Stock, Brown, Terracotta |
Related Articles
How-To Corner
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Rolling over a cord cover - Will a standard office chair easily roll over the cord cover? Thank you!
- Thank you for your question. While a chair will roll over the cord cover just fine, it might a bit steep and dangerous if someone is sitting on it.
Cutting to size - How do you cut this to size? Is it hard to get desired length?
- Thank you for your question. The preferred method is using a hacksaw, you should have no problems.
Mounting ED-CSX-4 - If I wanted to mount this on a wall - how would i go about doing that?
- Thank you for your question. Depending on how much you are going to be loading on the cord cover you can either screw the center of the channel onto a wall or use double sided tape that we have available HERE.
How many cable cords will fit in this cover.
- Thank you for your question. The number of cords it holds will depend on the type of cable you are concealing. Best bet is to measure the diameter of your cables and match it to the closest measurement of cable shields we offer. If you have questions, we are here to help.
Can you buy it at a store?
- Thank you for your question. We are an online retailer only but we are happy to have this product shipped wherever you would like. Give us a call to place an order.
I'm just covering a lamp cord. What size should I use?
- Thank you for your question. That will depend on the diameter of the cable you are concealing. We offer a variety of sizes so I am sure we can help you find the best one to fit your needs. Please give us a call at 866-222-0030 so that we can assist you.
Are any of the cover options paintable?
- Thank you for your question. The Studiosaver cord cover protector has a stainable option: https://www.cableorganizer.com/studiosaver/. Please do not hesitate to contact us if you need further assistance.
Will this accommodate Romex 14??2?
- Thank you for your question. We would welcome an opportunity to work with you to better understand your project and requirements. Please call 866-222-0030 to discuss further
How hard is it to remove? Does it damage the flooring below? This item is not hard to remove at all, if you purchase our double sided tape it should make the placement and removal of this item much easier to manage. Double Sided Tape Part Number is: DST-10 or DST-100
-
Will this material crack if stepped on a lot or if something heavy, like a piano, has to roll over it?
- Although this cord cover is capable of withstanding up to 661 lbs we also offer rubber cord covers that will be able to withstand more weight and use. They can be found here https://www.cableorganizer.com/cord-covers/economical.htm or https://www.cableorganizer.com/p/wirerun-cord-cover/
Hi, On this product, do you or would you offer lengths longer than 59" for the wood grain 1"W x .3"H Channel. I would need a at length 8ft continous.
- Thank you for your question. Unfortunately this product does not come in a 8ft continuous length. Please call 866-222-0030 if you have any additional questions
Do you have to feed the cord through it or does it open up to place the cable inside?
- Hello, This item can open up into 2 pieces(top and bottom). This may make it easier to place your wires inside the cable cover. If you have any more questions please feel free to call us toll free at 866-222-0030
How do I get this item apart? Do I pry it open or try to slide the sides apart. I've tried sliding it and it doesn't budge.
- Hello, The top and the base do slide separately. It's tough to slide off because the manufacturer doesn't want this item to break or conform under pressure. If the pieces were too loose any light pressure would make them come apart easily. My advice would be to use a pair of pliers to hold the bottom or top piece while you will the other.
Do you have any questions about this product?
Let our experts and customers resolve all your doubts