HellermannTyton® Saddle Mounts

What's special about these saddle mounts?

2-Way Saddle Mount

• Separates bundles from wear and chafing, providing additional longevity.
• Hexagonal retention feature (S2HM25) captures a bolt or nut requiring tool access from the back side only.
• A socket counterbore allows securing with a socket wrench from the top side for use with a weld stud or bolt (S2CM25.)
• Made from impact modified, heat stabilized, UV resistant material making it ideal for heavy duty applications.



Fir Tree Saddle Mount

• Heavy duty fir tree mount requires low insertion force and high extraction force.
• Impact modified, heat stabilized, UV material makes it ideal for heavy-duty solutions.



Saddle Mount for Button Head Tie

• Secures up to three bundles for multiple routing.
• Provides parallel spacing between frame rail and adjacent bundles to reduce wear.
• Manufactured with a pilot bushing which prevent the cable tie from chafing against the burr edge of the mounting hole.
 
• 

HellermannTyton's 2-way saddle mount can be installed between two bundles (such as wires, cables, hoses, tubing, conduit, etc.) to separate them and prevent chafing and wear. Fastened to a frame rail or mounting bracket, the H-profile on the saddle mount provides a tight circumferential loop on large and small bundles. Cable ties up to 1/2" wide are used to secure the bundles.
The saddle mount (fir tree mount) acts as a standoff, elevating bundles above bolt protrusions commonly found in frame rails and panels. A tension tab on the mount allows cable ties to be pre-assembled in a ready position prior to bundles being brought to the mount. The mount can secure up to four separate bundles, providing parallel spacing between the frame rail and adjacent bundles. Fir tree eliminates the need for mounting hardware. For use with HellermannTyton T50-T255 ties.
HellermannTyton's saddle mounts with button head ties; the saddle mount stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion. This mount also allows the flow-through of salt, dirt, and other impurities from the road which prevent unwanted build-up on hoses and harnesses. The tie is snapped into the mount which allows the strap and tie assembly to be pre-installed on the frame rail or panel. The mount can secure three separate bundles, providing parallel spacing between the frame rail and adjacent bundles. The saddle mount is manufactured with a pilot busing which prevents the cable tie from chafing against the burr edge of the mounting hole.

Questions & Answers