Insultherm™ Braided Header Wrap
High Temperature Header and Exhaust Protection
TX-MSHFN100
What's special about these braided wraps?
- Resists extreme temperatures and helps extend the life of performance headers and exhausts
- Chemical resistant to protect metal finishes from corrosive engine chemicals and gasoline
- Reduces the amount of heat released to increase horsepower and improve fuel economy
- Click for More Features
-
Insultherm™ Head Wrap and Header Wrap SI is an extremely temperature-resistant braided wrap used in automotive and high performance headers and exhausts. Designed to allow just enough heat to escape when properly installed, this helps to improve automotive performance and staying power under normal to extreme conditions.
| Header Wrap (up to 1,000° F Continuous Protection) | ||||||
|---|---|---|---|---|---|---|
| Part # | Wall Thickness | Width | Spool Length | Color | Weight | Price |
| TX-MSHFN100 | 1/16" | 1" | 50' | Black, Natural | 0.75 lb | Manufacturer Direct
|
| TX-MSHFN200 | 1/16" | 2" | 50' | Black, Natural | 1.53 lbs | Manufacturer Direct
|
| TX-BSHFN100 | 1/16" | 1" | 100' | Black, Natural | 1.50 lbs | Manufacturer Direct
|
| TX-BSHFN200 | 1/16" | 2" | 100' | Black, Natural | 3.05 lbs | Manufacturer Direct
|
| Header Wrap SI (up to 2,000° F Continuous Protection) | ||||||
|---|---|---|---|---|---|---|
| Part # | Wall Thickness | Width | Spool Length | Color | Weight | Price |
| TX-MSHSN100-NT | 1/16" | 1" | 50' | Natural | 0.75 lb | Manufacturer Direct
|
| TX-MSHSN200-NT | 1/16" | 2" | 50' | Natural | 1.53 lbs | Manufacturer Direct
|
| TX-BSHSN100-NT | 1/16" | 1" | 100' | Natural | 1.50 lbs | Manufacturer Direct
|
| TX-BSHSN200-NT | 1/16" | 2" | 100' | Natural | 3.05 lbs | Manufacturer Direct
|
| Header Wrap SI | Header Wrap | |
|
Abrasion Properties
|
||
| Abrasion Resistance | Medium | Good |
| Abrasion Test Machine | Taber 5150 | Taber 5150 |
| Abrasion Test Wheel | Calibrase H-18 | Calibrase H-18 |
| Abrasion Test Load | 500g | 500g |
| Room Temperature | 75° F | 75° F |
| Humidity | 65% | 65% |
| Material Showing Visible Wear | 75 Test Cycles | 400 Test Cycles |
| Material Destroyed | 225 Test Cycles | 500 Test Cycles |
| Pre-Test Weight | 11,600.7 mg | 13,162.7 mg |
| Post-Test Weight | 9,518.62 mg | 11,614.3 mg |
| Test End Loss of Mass Point of Destruction | 2,082.08 mg | 1,548.4 mg |
|
Chemical Resistance
|
||
| Aromatic Solvents | n/a | n/a |
| Aliphatic Solvents | n/a | n/a |
| Chlorinated Solvents | n/a | n/a |
| Weak Bases | n/a | n/a |
| Salts | n/a | n/a |
| Strong Bases | n/a | n/a |
| Salt Water (O-S-1926) | n/a | n/a |
| Hydraulic Fluid (MIL-H-5606) | n/a | n/a |
| Lube Oil (MIL-L-7808) | n/a | n/a |
| De-Icing Fluid (MIL-A-8243) | n/a | n/a |
| Strong Acids | n/a | n/a |
| Strong Oxidants | n/a | n/a |
| Esters / Keytones | n/a | n/a |
| UV Light | n/a | n/a |
| Petroleum | n/a | n/a |
| Fungus (ASTM-D-2863) | n/a | n/a |
| Outgassing | n/a | n/a |
| Oxygen Index (ASTM D2863) | n/a | n/a |
|
Physical Properties
|
||
| Flammability | Non-Flammable | Non-Flammable |
| Recommended Cutting | Scissors | Scissors |
| Stock Colors | 1 | 2 |
| Wall Thickness | 0.0625 | 0.0625 |
| Specific Gravity (ASTM-D-792) | 2.2 | 2.6 |
| Melt Point (ASTM-D-2117) | n/a | 1,200° F (649° C) |
| Maximum Continuous (MIL-I-23053) | 2,000° F (1,093° C) | 1,000° F (538° C) |
| Minimum Continuous | n/a | -70° F (-57° C) |
| Material | Amorphous Silica | Vermiculite Coated Fiberglass |
Manuals
Related Articles
How-To Corner
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts