SignalTEK® II & II-FO Fiber Optic Qualification Testers
An Entire Arsenal of Fully Functional Network Testers in One Unit
What's special about these network cable qualifiers?
- Tests fiber optic and copper cabling to IEEE 802.3ab and other Gigabit performance standards for use in commercial networks.
- Performs several useful operations including pin/pair wire mapping, various performance tests, and ping testing, allowing you to replace several other testers.
- Tests can be performed through switches and intermediary equipment, allowing full system diagnosis without having to disconnect components.
- Ideal for qualifying any new fiber optic or copper cabling installation for use in VoIP, CCTV, Ethernet, and other high-bandwidth applications.
- Click for More Features
The SignalTEK II™ Fiber Optic Qualification Tester by Trend® takes the growing portability, efficiency and advancement of the modern tester to the next level. This tester qualifies any fiber or copper cable to IEEE 802.3 standards and performs necessary network testing operations. Whether you need to qualify, wire map, test speed and performance, or even measure cable, the SignalTEK II has you covered.
NOTE: The SignalTEK II-FO Kit (Copper and Fiber) ID-R156001 has been discontinued, but you still can buy some accessories from us.
Power Modules | ||
---|---|---|
Part # | Description | Price |
ID-151051 | Power Supply with United States, Europe and United Kingdom Adapters | Manufacturer Direct
|
ID-151052 | Alkaline Battery Module | Manufacturer Direct
|
ID-151053 | NiMH Power Modules (rechargeable) | Manufacturer Direct
|
Contents:
Comparison Charts:
Ports / Connections | |
---|---|
RJ-45 Port (Shielded) | 10/100/1000Mbps Ethernet |
SFP (Small Form-factor Pluggable) | Accepts 850nm and1310nm modules |
Others | USB A/B DC Power input |
SFP-8500-0850nm Module | |
Laser | Class 1 Laser EN60825-1 |
Compatible Fiber Types | 50/125 µm or 62.5/125 µm graded index multimode fiber |
Power Output | -9.5 min, -3 max dBm |
Receiver Power Range | 0 to -20 dBm |
Max Link Length | 550m (1800ft) on 50/125 µm fiber; 300m (985ft) on 62.5/125 µm fiber |
Operating Temperature | -10 to 85°C (14 to 185°F) |
Relative Humidity | 85% non-condensing |
SFP-13X0 - 1300nm Module | |
Laser | Class 1 Laser EN60825-1 |
Compatible Fiber Types | 50/125 µm or 62.5/125 µm graded index multimode fiber and 9/125mm step index single mode fiber |
Power Output | -9.5 min, -2.5 max dBm |
Receiver Power Range | 0 to -22 dBm |
Max Link Length | 550m (1800ft) on 50/125 µm fiber; 300m (985ft) on 62.5/125 µm fiber; 10km (6.2mi) on 9/125 µm fiber |
Operating Temperature | -10 to 85°C (14 to 185°F) |
Relative Humidity | 85% non-condensing |
Length Measurement | |
RJ-45 Port | TDR (Time Domain Reflectometer) length measurement of 1-4 pair cables to 140m/460ft |
SFP Port | No length measurement of fiber optic cables |
Best Error Rate Measurements | |
Copper | 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard |
Fiber | 1000Mbps. Error rates tested to IEEE 802.3ab standard |
Battery Life | |
Copper Testing | Approx 15 hours @ 22 tests per hour (45s Autotest) |
Fiber Testing | Recommend use of AC adapters when testing fiber |
Dimensions (Kit) | |
Length | 18.5" [46,99 cm] |
Width | 12.5" [31,75 cm] |
Depth | 4.5" [11,43 cm] |
Manuals
Related Articles
How-To Corner
Request A Quote
Did you know that we can give you a quote for most of our products, including shipping?
You can also call us toll free 1-833-3CABLEORG (1-833-322-2536)
Questions & Answers
Do you have any questions about this product?
Let our experts and customers resolve all your doubts